Fakultas Teknik
Recent Submissions
-
Design and Simulation of Rectangular Patch Microstrip Antenna with Inset Feed for S-band Application
(IOP Conf. Series: Materials Science and Engineering, 2020)Microstrip antenna is one of the most applied antennas for various radio applications as its low profile and high performances. This paper discusses design and simulation of the rectangular patch microstrip antenna (RPMA) ... -
Numerical Simulation of a Rectangular Microstrip Patch Antenna for 3.35 GHz Applications
(Journal of Physics: Conference Series, 2020)This paper described the design and numerical simulation of a rectangular microstrip patch antenna for applications at 3.35 GHz. The numerical simulation carried out with the aid of AWR software. The initial design was ... -
Simulation and Optimization of Microstrip Dipole Antenna using Cohen-Minkowski Fractal for 433 MHz Applications
(International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM), 2021)Fractal is a geometrical shape that is built by simple repeating instructions. One of fractal geometry is Cohen- Minkowski. This paper discussed the implementation of the Cohen-Minkowski fractal of first and second ... -
Design of Rectangular Microstrip Patch Antenna Using Aperture Coupled Fed for S-Band Application
(International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM), 2019)This paper discussed the design of rectangular microstrip patch antennas using a coupled aperture fed. The antenna is designed for working on frequency of 3.2 GHz for Sband applications. The antenna substrate is FR4 ... -
Analysis of Workload and Number of Workers in Brick SMEs
(Universitas Sumatera Utara, 2019)This research was conducted in two brick SME s whose production processes include mixing, printing, drying and burning. In both SME s, there are idle workers indicating an unbalanced workload. Worker activity observation ... -
Clasification of Ergonomics Levels for Research
(Universitas Sumatera Utara, 2019)Ergonomics is useful to create a conducive system among people, work facilities, and work environment, so that the task demands are not underloaded or overload. Task demands far greater than the human ability or capacity ... -
Improving the Physical Work Environment by Looking at the Effect of work Environment Factor on SME
(Universitas Sumatera Utara, 2019)Each company wants the operator able to work optimally, so that the operator's productivity is expected to increase. Each operator has different productivity at work. Operators who have high productivity in work generate ... -
Hazard Identification of Repetitive Truck Loading Activities in Mineral Water Industry
(Universitas Sumatera Utara, 2020)A good work system is one of the most important factors in the company's progress, and is the main key to success to increase productivity, company efficiency, and reduce the risk of injury. This research was carried out ... -
The Intervention of Participatory Ergonomics in Repetitive Truck Loading Improvement Activities for Mineral Water Product
(Universitas Sumatera Utara, 2020)This research was conducted at a bottled drinking water company located in Sumatera Utara, Indonesia. Workers loading gallon water bottles into trucks experiencing musculoskeletal complaints (MSDs). Rapid Upper Limb ... -
Calculation of Physiological Load and Energy Consumption of Warehouse Operators in Manufacturing Companies
(Universitas Sumatera Utara, 2020)The modest workload provided by operators is the responsibility of every manufacturing company. Operators with excessive workload on an ongoing basis will cause discomfort and even abnormalities in the physiological ... -
Development on Meso Ergonomics in Manufacturing Based on Research Trends in the Last Twenty Years
(Universitas Sumatera Utara, 2020)Meso ergonomics continues to develop, research journals on meso ergonomics continue to increase in number, meso ergonomic discussions are carried out ranging from the scope of studies to the application of meso ergonomics ... -
The Effect of Illumination on Work Result in Sorting Department
(Universitas Sumatera Utara, 2021)In order to perform well and obtain a good result, working in a company requires conducive working conditions. Working conditions can be physical environment or a social organizational environment. The physical environment ... -
Effect of Small Amount SiC on Mechanical Properties Composite Fabricated by Casting and Subsequent Rolling Process
(Universitas Sumatera Utara, 2020)Aluminum matrix composites (AMCs) are promising material to develope for engineering application in last a few decade. Combination between aluminum matrix and reinforced particles was succesfull increase the mechanical ... -
The Analysis of Composite Properties Reinforced with Particles from Palm Oil Industry Waste Produced by Casting Methods
(Universitas Sumatera Utara, 2017)Palm oil processing industries are very attractive because they offer plenty products with high economic value. The CPO factory processes not only produces crude palm oil but also generates fly ash (FA) particles waste ... -
The Performance of a Solar Collector on Adsorption Refrigerator
(Universitas Sumatera Utara, 2018)The performance of a flat plat collector on adsorption refrigerator driven by solar collector was investigated in the present work. The adsorbent used of this study were 20 kg ordinary powder activated carbon of coconut ... -
Performance of the Natural Cooler to Keep the Freshness of Vegetables and Fruits in Medan City
(Universitas Sumatera Utara, 2018)One application in a direct evaporative cooling system was a natural cooler. The advantages of this system were not using the electrical energy and so far also environmentally. This research aims to obtain a performance ... -
Quality Assessment Using Quality Loss Function Method in PT. QRS
(Universitas Sumatera Utara, 2020)The process of production affects the quality of the products produced. Related to this, good quality control is needed to improve product quality. This quality control can be done by improving methods or production ... -
Analysis of Production Obstacles in Assembling G Line Process Using FMEA Method (Failure Mode and Effect Analysis)
(Universitas Sumatera Utara, 2020)PT. XYZ is a company engaged in the manufacturing industry of manufacturing fourwheeled vehicles. Based on the results of preliminary observations, it was found that the production process in the G Line assembling section ... -
Priority of Selection Suppliers with Fuzzy ANP COPRAS-G
(Universitas Sumatera Utara, 2019)The company which is engaged in spring bed production is located in Medan city Procurement of raw materials is the main activity in ensuring the clear production. Delivery delayed by suppliers of raw materials affects ... -
Reducing Waste in Spare Part Production Process with Lean Manufacturing Approach
(Universitas Sumatera Utara, 2019)In the current era of globalization, competition in the industrial world is increasingly competitive, and then the manufacturing industry must be able to optimize its ability to compete. PT. ABC is a battery production ...
RSS 1.0